Trevi XCD 5760 USB Instruction Manual download pdf (Page 13)

XCD 5760 USB

ENGLISH

6) MASK DPI/MASK ALL:

MASK DPI mode: masks only the AF which has different PI.

MASK ALL mode: masks the AF which has different PI and NO RDS signal

with high field strength.

7)BEEP ON/BEEP OFF

BEEP ON mode: The beep is generated when any key is pressed.

BEEP OFF mode: The beep sound is disabled..

8) VOL LAST/VOL DEFA

VOL LAST: The radio switches on at the actual volume it had when it was last

switched off.

VOL DEFA: After pressing SEL button, AVOL will be displayed. Then you can

pre-select a constant switch-on volume by using the VOL knob.

9)CLK ON/OFF

CLK ON: Clock will always show on the display when power off.

CLK OFF: Clock will disappear on

the display when power off.

a) During radio mode:

Go to any preset station by pressing one of the 6 preset station buttons (1-6).

If one of these buttons is pressed for more than2seconds, the station

currently being listened to will be memorized into the selected preset button.

b) During disc, MMC/SD or USB mode:

1) Press the TOP/ >|| button briefly to interrupt the playback of the disc, MMC/SD

or USB. Press again to resume normal playback of the disc, MMC/SD or USB.

Press the TOP/>|| button and hold for approximately 0.5 seconds to play the

first track of the disc, MMC/SD or USB.

2) Press the INT button to sample the first 10 seconds part of each track, and the

INT ON will be visible on the LCD display.

In the process of INT, pressINT button again to stop sampling and to continue

playing the current track, and the LCD will display INT OFF.

3) Press the RPT button once to play the cur

rent track repeatedly, and the RPT

ONE will be visible on the LCD display.

During MP3/WMA disc, MMC/SD or USB mode, press the RPT button twice

continuously to play the current folder repeatedly, and the RPT ABM will be

visible on the LCD display.

In the process of RPT, press RPT button again to stop playing repeatedly

mode and the LCD will display RPTOFF.

4) Press the RDM button to play all tracks on disc in random order, and the RDM

ON will be visible on the LCD display.

In the process of RDM, press RDM button again to stop playing in random

order and the LCD will display RDM OFF.

5) Press the 5 and 6 button to move up and down10 tracks atatime.

When the remained total tracks is lack of 10, the both buttons are inactively.

Press and hold the 5 and 6 button to select next or previous folder to be play.

9-14. PRESET STATION MEMORY AND TOP/>||, INT, RP

T, RDM BUTTONS

Page8 Page5

CARE FOR USING CD'S:

1. To keep the disc clean:

Before playing a disc, wipe it off with a clean, dust-free cleaning cloth.

Wipe the disc outwards from the disc center.

2. When one has already been inserted. Doing so may damage the unit

Do not attach any sticker or adhesive tape on the disc.

Handle the disc by its edge to keep the disc clean and do not touch the surface.

. Insertadisc

with labeled surface up, or it will damage the unit.

3. Do not expose the disc to direct sunlight or nearby heat sources such as heating

vents, caliduct which can cause the disc to warp.

Do not leave disc in a car if it is parked in direct sunlight as that will lead toa

considerable rise in the temperature inside the car.

Do not use any secondhand or rented disc, usually, there is glue on the surface of

those discs, it will stop the unit working and damage it.

5. Always store the disc in its case for protection. Scratched up discs will produce poor

sound performance and cause CD player to skip.

6. In raining day or wet area, the moisture may form on the disc or the optical parts,

the playback may not be possible. If moisture forms on the disc, wipe it off witha

soft cloth.

If moisture forms on the optical parts of the unit, allow the unit to sit for about one

hour with power on.

7. Do not use solvents such as benzine or thinners. Commercially available cleaners

or anti-static spray will damage the unit.

About CD-R/CD-R/W discs:

In additio

n to commercially-recorded audio CD's, this unit can play CD-R and

CD-R/W discs. In some cases, particularly when recorded on older CD burners,

some CD-R and CD-R/W discs may not play. Also, whenever you are recording

a CD for playback in this receiver, it is recommended that you record at 24x or

slower speed for CD-R and 4x or slower for CD-R/W to achieve higher signal

quality and better playback performance.

PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 39 40

Comments to this Manuals

No comments

Trevi XCD 5760 USB Instruction Manual Page 13

Comments to this Manuals

Related products and manuals for Car media receivers Trevi XCD 5760 USB